Madeleine L’Engle’s “A Wrinkle in Time”

Madeleine L’Engle’s â€Å"A Wrinkle in Time† ranks with the best known classic children’s stories. Perhaps a â€Å"Lewis Carroll Shelf Award† and a runner-up position in the â€Å"Hans Christian Andersen Award† would prove this claim.However, all the prestigious awards and the wide readership were not enough to put â€Å"A Wrinkle in Time† in the pedestal of being one of the best works classic children literature.L’Engle’s science fantasy had received a barrage of criticisms from literary critics. The aspect of the story that had received much damage is the story’s ending. Before we go on further with this exploration of â€Å"A Wrinkle in Time†, it is essential to reiterate that the story is categorized as a children’s story—it is intended audience were children.The critics of the novel had approached the narrative in an overly critical fashion that is opposed to the book’s nature of be ing a light and fun read. And because of much overly critical approach, many had failed to appreciate that â€Å"A Wrinkle in Time† is packed with valuable insights that are likely to have a positive effect on young readers.The composition of the story seems to aesthetically decent for its intended audience. The plot was rich in exciting adventures and entertaining elements like aliens and inter-space travels—elements that grab the attention of children.The protagonist of the story was a fourteen-year-old school girl by the name of Meg Murry. Having a child as a protagonist makes it easier for young readers to relate more to the book. Moreover, before all the science fantasy elements were introduced, predicaments that are normal to a child were discussed through the character of Meg.She is considered to be an underachiever and short-tempered by the people around her. These kinds of predicaments, more commonly called peer-pressures, are faced by average children worldwi de.In addition to that, Meg is set to have an adventure of a life with her brother and friend to rescue her father. This kind of adventure would sound very interesting and fun for children readers.The effectiveness of the narrative as a story for children owes much to its uncomplicated language. The language that L’Engle had incorporated in the text was uncomplicated enough for easy absorption for children of reading level.But more notably is that although there was science fantasy elements in the story, L’Engle did not presented those elements a scifi-geeky way. The uncomplicated language can be seen when Mrs. Whatsit was explaining the â€Å"tesseract† to a child like Meg (L’Engle 85).The fact that â€Å"A Wrinkle in Time† a wide readership is arguably already enough to prove its effectiveness. The critics of the novel had made an approach that is considerably unnecessary. They had stripped a children’s story off its very essence. This pap er would stand beside the argument that any overly critical approach to this particular text can be considered an over-reading.The novel was not written for critics, it was for the children’s enjoyment. And because of an overly critical approach, many had failed to appreciate the ending of the story. What makes the ending appreciable is it is rich with insights that are likely to have a positive effect on young minds.For us to have a better vantage point in reviewing the ending, let us divide the ending into three significant parts: Meg’s final battle with IT, the reunion of the family, and Mrs. Whatsit’s invitation for further adventures.In Meg’s final battle with IT, the children are given the suggestion that they are capable beings. Meg is just an average child defeating an alien disembodied brain. This aspect could boost a child’s confidence towards facing challenges in life.In Meg’s reunion with her family, children are taught how to ca re for others. Her father and other characters were anxiously waiting for Meg’s safe return. This had taught Meg that she is important as person. Just like the protagonist, children readers could also have the same positive realization.Mrs. Whatsit’s invitation for further adventures suggests that after some challenges in life, may it be being an underachiever or getting lost within the continuum of time, better things and more adventures are waiting for us.The optimism that this could instil in the minds of the children would be very useful to them for this will teach them a positive outlook in life. A positive outlook would help the children through challenges in life, especially when they grow and move to adulthood—where scepticism and pessimism are prevalent.The ending should not be tampered with by the readers as changing the ending would violate the concept of authorship. Revising the ending is plain plagiarism and with simple logic, this is L’Engle ’s story—not the reader’s.Although, it is understandable that the readers and critics to have opinions and interpretations. But they should not tamper with a classic of children’s literature that was enjoyed by generations of young readers. What they could do with their opinions and interpretations is to keep those as writing materials. Who knows? They may end up writing a masterpiece for children just like â€Å"A Wrinkle in Time.†Work CitedL'Engle, Madeleine. A Wrinkle in Time. NY: Dell. 1973

Automobile and Tucker Essay

The movie, Tucker: The Man and His Dream, is the story of a man named Preston Tucker and takes place in the 1940’s. Preston Tucker’s dream was to design and build the greatest automobile ever made. At first, he began by bringing home drawings of his dream car, which was to be called the Tucker Torpedo. He showed the drawings to a man who would eventually become his partner, Abe. Initially, Abe doesn’t like the idea of building a car, but he didn’t know anything about cars. Tucker placed an advertisement in a magazine about his car, and the public became excited. The car would have an engine in the rear, a middle headlight that turned with the car, and a windshield that would pop out when the car was in a wreck. In the meantime, Robert Bennington, who was the CEO of Ford, became worried that the Tucker Torpedo may put Ford out of business, so Bennington made a deal with him to allow him to buy a plant to build the car in. This also gave Ford a reason to be involved in building the car. The deal stated that Tucker must make at least fifty cars in one year in order to keep the plant, and the first car needed to be presented to the public within sixty days. Abe invested $6,000 to help Tucker build the first car. On the day of the presentation, the car was built but had no engine. Therefore, they had some problems getting it on stage, but once it was on stage, the thousands of people who attended the presentation cheered. After that, Bennington announced to Tucker that he wanted to change the car. He didn’t want the engine in the rear of the car, and since the ? Big 3†², the three largest automobile makers in the US, were buying all of the steel, there was not enough for Tucker to buy to build his cars. Tucker protested the ? Big 3†². A man named Howard Hughes, who owned a steel company, told Tucker about a helicopter company who needed to sell steel. So Tucker bought a helicopter engine and converted it to a car engine, and the car worked. After Tucker protested the ? Big 3†², he was spied on by people who worked for the ? Big 3†² companies. They accused him of not running his business properly, but it was not true. Abe got scared because he had already served three years in prison for bank fraud and did not want to get caught up in another mess, so he resigned. Then, there were commercials out that told the public that Tucker’s car was built piece by piece from a junkyard. Eventually, the government started a full investigation on Tucker and charged him with fraud. Tucker lost most of his investors from this, and had already spent too much money trying to build the car. He did make all the cars, but he did not make the fifty car minimum in time and lost his plant. He was found not guilty of fraud, but after all the bad publicity, people no longer wanted the cars, and Tucker had lost a lot of money, so no more cars were ever made. Today, some of Tucker’s Torpedo’s are still around; some are in museums, and some of them even still run. After watching the movie, I researched the Tucker Tornado on the Internet. One source, The History of the Tucker 48, at www. gizmohighway. com, says that the car actually had additional features not mentioned in the movie. In addition to the turning headlight, rear engine and the windshield that would pop out, the Tucker Torpedo also had more room inside the car and padded steering wheels and dashboards. Another source, 1946 Tucker Torpedo, at www.cybersteering. com, also says that Tucker applied for a $30 million loan before he was accused of fraud and that in 1956, Tucker died of lung cancer in Brazil while trying to build another car, the Carioca. I also found in the open letter from Preston Tucker, at www. tuckerclub. org, that this is a letter that Preston Tucker wrote to protest the other automobile companies and the investigations that eventually killed his company. In it he says that he actually had 1,872 Tucker dealers and almost 50,000 investors that put $25 million into his company. The definition of an entrepreneurship is a person who organizes and manages a business, assuming the risk for the sake of a profit. Preston Tucker started a company and wanted to build a car for Americans knowing that it would take a lot of money that he did not have. He organized and managed the business and assumed the risk of losing a lot of money for a lot of people. I think that Tucker was not treated fairly by his competition. New entrepreneurs like Preston Tucker should be given the same fair chance to build a business just like the others had to build theirs.

Academic Degree and Financial Aid Essay Example for Free

Academic Degree and Financial Aid Essay ? Thank you in advance for taking the time to review my letter of appeal for financial aid reinstatement. First, let me say, I wholeheartedly appreciate your granting me this award in order to make my educational dreams a blissful reality. It would be a great honor for me to continue on the path which I started before I suffered this temporary setback. I take full responsibility for why my grades slipped and because unsatisfactory. There is no one else to blame but myself for not being able to control my emotional state during a time of terrible crisis to the point where I could maintain an acceptable G. For that I am sincerely sorry because I feel that I have let many people down, including myself. I put a lot of effort to pass most of my classes, yet I still failed my English course due to some negligence on my part as concerns my work which was to determine my grade in the course; I did everything possible to do great in the course despite my mistakes but I guess it was not good enough during the semester Fall 2013. I promise not to make such mistakes anymore, and be more responsible. I am asking this committee to give me a second chance to prove that I am worthy of this award so I can continue in my studies this Fall 2014 Semester. I do realize that I neglected my studies and I would like another chance to do better in them. I have compiled a list of steps I need to take in order to be successful in school and my studies. 1. I would obtain a tutor for my most difficult classes by becoming familiar with the tutoring center on campus 2. I would manage my time wisely so that I can balance my life and studies together. 3. Meet with each of my instructors and talk with them, about what they believe will make me be a better student in their class. 4. Go to the scheduled office hours of each of my instructors, when facing any difficulties. 5. Talk with my advisor who is assisting me with my Academic Degree plan. She advises me on the classes and hours that would be suitable for me. 6. Go to class on time as scheduled to take advantage of what they have to offer. My goal is to earn a degree in business so I can make a difference in the lives of people and young students. This is very important to me because I’ve always been interested on being a business lady in the future during my days as a kid. I can only be able to achieve my goal if my financial aid is being appealed, because as an individual my family face a lot of financial difficulties and I’m not able to pay my tuition or even get my books. I am a hard working student and very determined, and I would like the chance to prove to you that this 2014 Fall Semester would not be a disappointment. I would try hard to be a good role model to my family, friends and other students. My education is of paramount importance to me. Thank you for your time Yours Sincerely, Ruth Taku. Academic Degree and Financial Aid. (2016, Sep 24).

Structure and Bonding of 5 different materials (Chemistry) Assignment

Structure and Bonding of 5 different materials (Chemistry) - Assignment Example Silicon dioxide forms a giant covalent structure/lattice, extending in all the 3 dimensions. Each silicon atom is covalently bonded to 4 oxygen atoms. A large number of covalent bonds are present. This renders it high strength and hardness. A huge amount of thermal energy is needed to overcome these forces and cause melting of silicon dioxide, which hence explains the high melting point. Similarly, energy of dissolution when dissolved isn’t high enough to make it soluble in either of the polar or non polar solvents. Since the atoms are rigidly fixed in their positions with no free electrons, silicon dioxide is not a conductor of electricity as such but behaves as a semi conductor. Carbon dioxide is a gaseous compound found in the atmosphere at concentrations of 0.3%. Carbon dioxide has a molecular structure where each carbon atom is covalently bonded to two oxygen atoms as shown in the figure. As the Mr of carbon dioxide is a mere 44, weak intermolecular forces (instantaneous dipole-induce dipole forces) exist between the molecules of the carbon dioxide (BBC Higher Bitesize, 2009). These are easier to overcome and therefore, carbon dioxide has a very low boiling point, such that it is present in the gaseous state at room temperature. Having no free electrons, it is a non-conductor of electricity. It can dissolve in water and other solvents owing to solute solvent interactions. Copper is metallic in nature, which is widely used in electrical wires owing it its high conductivity. It is hard yet malleable and ductile, has a high melting and boiling point and is insoluble in any kind of solvent. Metallic bond is formed the metal atom looses an electron to become a positively charged ion (Jim, 2010). The electrons (delocalised) form a sea of electrons which hold the positive metal ions together in a giant structure. These strong forces of attraction developed between the delocalised electrons and the metallic ions give copper it’s high melting and boil ing point. Moreover, it is the very same electrons that are free to move inside the metallic structure giving copper its good electrical properties (Green planet, 2011). Same electrons also act as thermal carriers making copper a good thermal conductor as well. The layers of atoms have the ability to move/slide over each other when a force is applied. This gives copper good malleability and ductility characteristics. However, this movement of layers is hindered by the grain boundaries which impart good hardness to copper as well. In water, each hydrogen atom is bonded to two oxygen atoms. Owing to the large difference in the electro negativity of the two, a partial positive charge appears on hydrogen while a partial negative charge is appears on oxygen. Furthermore, there exists a lone pair of electrons on the oxygen atom. When two water molecules come closer, a hydrogen bond is developed between the lone pair of electrons and the partially positively charged hydrogen atom (MDL, 200 8). This is a strong bond which raises the boiling point of hydrogen to 100oC. The absence of free electrons makes pure water a non-conductor of electricity and a bad thermal conductor. Being polar in nature, water is insoluble in organic solvents. Caesium Chloride forms a giant ionic lattice structure. Each caesium atom is bonded to eight chloride atoms through ionic bonds. Ionic bond exists because of large difference of electro negativities of the two atoms (Jim, 2010). The large number of strong ionic bonds

Article on artist Nina Valetova Example | Topics and Well Written Essays - 500 words

On artist Nina Valetova - Article Example cinatory effect which is conspicuous in several paintings is the result of the perfect blend of oil colors, very few artists in the whole wide world can create such a fine impact. The theme of surrealism which means something unimaginable has been very well presented in the works, this only goes to show how talented and creative the artist really is, Nina deserves to be extolled for her exceptional creativity. The works also reveal several tales but the viewers must put their heads to good use because she does not present the whole tale, most works need to be deciphered, only smart viewers would be able to do so. Her works are very enigmatic, at times the viewers feel that the works are frozen in time, the next second they feel that the same works are brimming with life, it becomes very incomprehensible for the viewers to understand the enigma surrounding the paintings. This again goes to show the ability of the artist to keep the viewers on tenterhooks. Each canvas is unique and presents new stories reveled by the artist, such uniqueness is hard to find elsewhere. The artist has put in a conscious effort to actively experiment with dimension and composition which has given an edge to her works over others, the paradoxical nature of the works has made them much more intriguing than it originally would have been. A viewer who is short of philosophical depth would not be able to comprehend the theme of the different canvases. The artist has dug deep to find irrationality of the modern society and several paintings portray the same. The unpredictability of the modern day society has also been presented in several painting. To conclude it is very fair to say that Nina is certainly unique from other artists’ she dares to experiment and think out of the box, her experimentation with different oil colors has always paid off, her experimentation with structure and dimension has also been very successful. Lastly, one needs to have philosophical depth to be able to

History Projects Assignment Example | Topics and Well Written Essays - 2500 words

History Projects - Assignment Example Abraham Lincoln was the president at the time the war ended in 1865. During the Reconstruction Period, the author indicates that the reorganization of the states was very hard for the Lincoln’s regime.After the Period, the 14th Amendment and 15th Amendment were passed giving black men the civil rights (Klose 24). He also points out on the World War I that began in 1914 and lasted for four years. The 19th Amendment passed in 1920 allowed women to vote.The Cold war started in the 1950 with the Vietnam War taking place in the late 1950’s. The author outlines the breakthroughs in economic, political and social fields until later in the 21st century (Klose 27). The author should have mentioned on the rapid industrialization that took place in the early 1990’s. He would have indicated the reasons for the occurrence of a peaceful period between the two world wars.He left out the Great Depression, which took place in 1929 to 1936. The Civil Rights movements that occurred after the Second World War have also been left out. The book is reliable when is discussing the history of America since 1865. As compared to other literary works, the author has presented the major events that took place in the United States since 1865 in chronological order. The book clearly indicates the end of slavery in America (Klose 30). It can be used by other students in history class particularly in describing the wars that have taken place since 1865. Instructions: Open the link stated above and Click History, North America and then American History since 1865. Other web links include: http://www.articlemyriad.com/american-history-1865-major-events-trends/2/ This website is very important to students because it gives the overview of the major events that occurred in North America since 1865(Smith par 1-2). The information on the website seems to have been obtained from other sources in which the writer fails to acknowledge the original authors.The

MHE507 - Bio-Terrorism Module 2 SLP Essay Example | Topics and Well Written Essays - 750 words

MHE507 - Bio-Terrorism Module 2 SLP - Essay Example All the means of bioterrorism identified had been considered ‘harmful’ before the attacks issued. During and after the attacks had been identified, the public had blurred the distinction between the harmful and the safe. Nowadays, people fear that everything around them can be used against them. This philosophy has led to negative feedbacks that controlled experiments about weapons of mass destruction earned. The mass fears that (1) the researches would eventually lead to more dangerous weapons, (2) the research is done to further taunt them, and that (3) the scientists are working towards a malicious goal. Any attack, be is large or small, should be considered as a potential attack, bearing in mind that even the simplest attack can lead to more hazardous ones. As a preliminary precaution, the statistics and facts involving the nature of the attack should be studied, and correspondence should be kept at all costs. â€Å"A look at the facts surrounding the outbreak to determine if anything seems unusual or indicative of bioterrorism should suffice (Pavlin, 1999).† The probability of an attack leading to an outbreak should not be overlooked, and at the first sign of an attack all systems should already be ready for surveillance. There are endless cases of possible attacks, ranging from endemic disease outbreak, reemergence of an old disease, the creation of new diseases, laboratory misfortunes to international attack. The researchers involved in the identification of which of the above-mentioned is the case at a certain attack should be able to observe the symptoms of the attack as well as the events that led to it to determine possible cause of administration. According to Pavlin (1999): The cause of a disease or even the occurrence of something unusual may be very difficult to determine, especially if the initial cases are few. Surveillance needs to be more than routine. Not only

Comparative essay of Shakespeare Example | Topics and Well Written Essays - 1250 words

Comparative of Shakespeare - Essay Example However, this has not been the case, especially in Macbeth. King Duncan had sons who depicted contrasting relations with him. Some, like Donalbain, seem to love his father yet this is not for sure. Malcolm, on the other hand, keeps the relationship between him the father very formal. To him, the father is just a king. However, he does not let it show until his father dies. When King Duncan dies, his sons fail to show their bereavement. None of them shed tears before the public; not even crocodile tears. If they must shed any tear, then they would rather do it in private places. To them, it is just the death of a king. Before the people, Malcolm and Donalbain keep it formal as if to show the relationship with the father was entirely kingship. The sons show further that their relationship with the father was merely kingship by their actions after he has been murdered. The first thing they thought of was how to escape from the anonymous murderer. If they really loved the father at personal levels, they would investigate the homicide first, instead of saving their lives. By the action of escaping and neglecting the case shows that they care much. The sons of King Duncan gave the dynasty first priority. Even as they escaped, their main objective was to save the kingdom of their fallen father. This is clearly depicted when the revenge time came. Malcolm’s revenge on the murderer, Macbeth, seems less personal. He just wants to punish Macbeth for killing a king, not the father. And by revenging, his aim was to restore the throne of the long gone king; not to repay the death of his father. The brave Macduff is, by contrast, a defender of the parents. The relationship between him and the father portrays true love and protection. Even though Macbeth succeeded in wiping out the family of Macduff, he fought tirelessly before his abandoned mother for the honor of his father. In his relentless defense, he dies in the line of duty. However, his death

Past Terrorist Use of Weapons of Mass Destruction Research Paper

Past Terrorist Use of Weapons of Mass Destruction - Research Paper Example Terrorism is a multi-causal phenomenon (Sommer, 2010) and involves a combination of varied factors including psychological, social, cultural, political, economic, as well as religious. Hence explaining the action in a concise and restricted definition would be highly erroneous and disillusioning. For the purpose of this study the term WMD would be defined to include any act of terrorism by an individual or an organization carried out on a large scale using chemical, biological or other weapons intended to cause irreparable damage to the property and lives of human beings; and disrupt the economic and social structure of the targeted region. Researchers have suggested various factors as key causes behind such acts of aggression, in a bid to understand the psyche of the terrorists. These factors range from local ethnic clashes to public outrage and dissent against international forces mainly arising due to differences in religious and cultural ideologies (Cordesman, 1989; DiGiovanni, 1999). Most of the researchers are of the opinion that most of such acts are carried out by individuals or groups belonging to terrorist organizations with a view to achieving their organizational missions (Gambetta, 2006). The use of WMD by terrorists has been in existence for several decades now and continues to remain as a potential threat to the United States as well as rest of the world. This paper aims to assess and analyze the use of weapons of mass destruction by terrorists by way of various case studies.

My Six Millennium Development Goals Essay Example | Topics and Well Written Essays - 1500 words

My Six Millennium Development Goals - Essay Example While the world most powerful countries boost of their economic achievement, some communities in developing nations lavish in extreme poverty. The stories about people living in extreme poverty are not only sickening but also heartbreaking. It is arguable that when a person lives in poverty, he or she is not able to acquire other necessities such as education, good healthcare among others. The World Bank and the UN have indicated that they have made incredible work in ameliorating the poverty scourge. If I were to assign a letter grade to this specific goal, I would give it an A. This is due to the fact that the United Nations shows efforts to eradicate poverty irrespective of the fierce financial crisis. The target for the extreme poverty MDG is to reduce the current prevalence by half. The UN report shows that many communities leaving under extreme poverty lacked essential needs such as water, food, and shelter. The aforementioned needs are critical to human existence. The progress ive report indicates that the project would meet its deadline. Liberty activists contend that extreme poverty is an indication of deprived rights. Most governments are part of UN accord, which advocates for human liberty. Hunger hampers social and economic development because it influences the ability of an individual to contribute towards nation building. This MDG is critical to the future of the world because the liberty that the society claims to enjoy is evident through social interactions.... The aforementioned needs are critical to human existence. The progressive report indicates that the project would meet its deadline. Liberty activists contend that extreme poverty is an indication of deprived rights. Most governments are part of UN accord, which advocates for human liberty. Target 1 B/ Fight against Hunger Hunger hampers social and economic development because it influences the ability of an individual to contribute towards nation building. This MDG is critical to the future of the world because the liberty that the society claims to enjoy is evident through social interactions. Social theorist believe that the fabric that holds the society depend on human satisfaction. Unfortunately, hunger influences a person’s contribution to social growth. Factors, which limit individual independence, may attract social delinquency in meeting these needs. For instance, a hungry society may not be able to think beyond a means that would enable it to receive food. This means criminal activities are options that the community can adapt to fight hunger. The grade I would assign United Nations in this goal is A- since fighting hunger with the present financial and climate instabilities is hard. The target of this goal is halve the prevalence rate by 2015. The United Nations and the World Bank have contributed in reducing the prevalence of hunger by initiating projects that will empower the affected communities. The UN and World Bank have collaborated with the respective governments in the affected regions such as Sub Saharan Africa, funding sustainable agricultural projects in order to empower the society. The aim of such project intends to

Polite and gracious Essay Example for Free

Polite and gracious Essay For the first time in my life things seemed to be looking on the bright side and then, just like usual, it was torn away from me by a selfish, ignorant Mr.Birling. I had been doing well at the works, had only recently been promoted as the leading officer, a head of a group of girls. I was in charge of them and got to know them well, there was Betty, Martha, Lucy, Agatha, Emma, Vicky and quite a few others. Marthas the nicest. Shes an orphan, like me so I guess. Well, during the short holiday in the summer, we got talking about our wages and how most of us were barely scraping by on the measly 22 6pence we got. I mean we were only just surviving and its no good just being able to survive, we wanted to live! Other people do so why cant we! So seeing as we shouldnt be treated as cheap labour, but people we decided to go to Mr.Birling himself and ask for 15 shillings instead. But as he is mean and penny pinching he refused blankly. Said he wouldnt even consider it! After that it only gets worse. Stupid as we were we went on strike hoping that that would show him but of course how could we manage having just been on holiday. We were all even more broke then usual, so the strike having failed miserably we had no choice but to go back to the works.  But No! It wasnt as simple as that, life never is. Of course he wouldnt accept us ringleaders back and came down himself and told us to clear out! I had a lot to say to that Mr.Birling but he wouldnt even listen to a word of it! Sent us packing right on the spot. If only he would have listened to me, Id have told him a thing or two! God, there is so many thoughts and questions running round my head! There is so much I want to say to people, but no one will listen. There are so many others just like me out there, who struggle and suffer simply because of the conditions they work in and the measly wages they receive but no one dares do anything about it. Why shouldnt we try for higher wages? Its unjust that we should be sacked just for having a little more spirit than the others!  But who am I kidding? Im just lower class, cheap labour, scum. Im meant to just accept that thats the way it is. Dont try and go against it, dont ask questions, dont do any thing but just take whats given you. Maybe it is Gods will for me to end up like this, just like it was for my parents. Im angry and frightened and dont know what to do. I have looked for almost 2 months for some kind of work but it is scarce and hard to get, Im living in lodgings which I cannot do for much longer, I have no money saved, not one penny, no family, few friends, no home to go back to, Im lonely and scared, stuck in a rut, unable to climb any where higher or better. No one to turn to for support or comfort apart from the lord some may say. But when out of the many times I have begged him to help me had he answered my prayers? Never. Enough of this miserable complaining. When has it done anybody any good? I guess Eva Smith is better than this (or I shall try to be). Just because some mean selfish man made me lose and job, that I hardly enjoyed any way, doesnt mean I have to throw everything away and stop living! I will try! Tomorrow I will continue looking for a job although if I shall succeed I do not know, but it is better than sitting here counting the pennies in the dark. I have never been so happy! Last week at last, my dream came true! No more cold nights, no more hungry bellies, no worrying if Ill make it till tomorrow, I am at last safe! I have eventually found a respectable, fairly well paid, secure job at one of the best, and most expensive shops around. Milwards! Every body goes there. No, not only every normal body but every rich, prosperous noble body! Its a wonderful stroke of luck, I really couldnt of asked for a better job! Its lovely working there, Im treated like a normal human being for once. Its an amazing change from the factory where I would be surrounded by loud machinery drilling into my head, people moaning and sweating, horrible smells, shouts and cries, no escaping from it. But now its completely different. Everywhere I look I see beautiful, clothes hanging rail by rail and whereas before the most I could do was longingly stare into shop windows I can now actually hold these gorgeous dresses and if Im lucky, try them on! I may even start saving up for one even though it would take a long, long time. Lovely people talk to me there and theyre ever so polite and gracious. They no longer look at me as if Im some piece of dirt but almost as if Im one of them. I feel like Ive entered a different world, a world with out suffering and pain. I see this as a good fresh start for a new life, a new road now lies ahead of me. This job is a lot better pay (I now get 95 shillings a week!) so I can now start looking to try and rent a place out for my self but the first thing I will do is go a buy my self a nice juicy steak with some of this weeks wages. Its been so long since Ive had a proper, tasty meal, I can feel my mouth watering just thinking about it. Well enough about food. I have been thinking recently that its about time I tried to find my self a husband. I look around me and everywhere I see are happy couples arm in arm. I know my parent would have wanted me to find a nice young man and now Im working in respectable job I can hopefully find one who isnt too badly well off and quickly settle down happily. I can see myself, in a few years time, married to a works manager of some sort. Hed be tall and dark and have beautiful blue eyes. Hed be ever so loving and caring to me and would never treat me badly. Wed have two lovely children, a girl and a boy, and we would live in the biggest, most beautiful rose covered, marigold house, along pixmore lane.

The Difference between Traditional and New Law Enforcement Strategies Essay Example for Free

The Difference between Traditional and New Law Enforcement Strategies Essay Professor Maia Jefferson The law enforcement community plays an important role in our day-to-day lives. They are not only tasked with enforcing the laws, but they are also tasked with helping out the community in various ways. What happens when the traditional model of law enforcement is changed? Will there be any resistance from certain divisions of the police force? What will be the major factor for the success of a new program, if implemented? Under the traditional law enforcement model, officers are tasked with responsibilities such as patrolling the streets and reporting broken sidewalks, potholes, street, and traffic lights that need to be replaced. Under the new program called â€Å"Employing Creative Closure Strategies,† patrolling officers work with sergeants and lieutenants to review crime data and come up with the best solution to problems. In doing this, it allows officers to display their expertise in areas such as criminal investigation, traffic enforcement, drug suppression, and routine patrol. With any organization, change is going to come with resistance. Some of the major resistance would most likely come from senior members of the force. These members that have been around for awhile have probably seen many leaders want to â€Å"make their mark† by implementing their own ideas. These skeptics have probably accepted the idea that certain divisions are specialized in the area of expertise and that changing the way that they operate would disrupt the tempo of the force. However, most people agree that change is a good thing and can lead to improvement within the police force. The new changes would no doubt endure opposition on some levels, but there would also be many who would support them. The supporters would most likely be the officers that are directly affected by the changes. By allowing patrolling officers to work directly with investigators, the police officers would feel more important and more connected with the community. Moreover, the actual responsibility of investigations will be shared among the patrolling officers and the investigation team. The collaboration of these two units will not only save time, but also money. The success rate for the â€Å"Employing Creative Closure Strategies† program has been proven more effective than the traditional patrolling methods. The change held individual officers accountable for investigating and resolving crimes in their patrol area, which played a major role in their success. (Johnson, 1997) Productivity and case closure rates began to rise, proving that the patrol officers were capable of assuming more responsibility. After 14 months, the number of cases that were solved increased dramatically. The new program â€Å"Employing Creative Closure Strategies† has proven to be a step towards improving the way law enforcement patrols. With any change comes disbelievers, yet there is always room for improvement. The ultimate goal of law enforcement is to protect the community and its citizens. By implementing the new system, there will be an increased level of security and an opportunity for police officers to learn from each other by taking on more responsibility. Bibliography Johnson, R. A. (1997, November). Integrated Patrol: Combining Aggressive Enforcement and Community Policing. Retrieved from Federal Bureau of Investigation web site: www. fbi. gov

The Steam Turbine Technology Engineering Essay

The Steam Turbine Technology Engineering Essay Steam turbine technology is the almost all of electricity generation power plants from biomass used power generation in the world at present. This technology is well established due to availability of cheap or waste biomass in the world. As an example, USA has the installed capacity of electricity generation from biomass around 7000 MW with efficiency of 20 to 25 percent. The biomass Boiler steam turbine systems are expected to find more applications for electricity generation in the future, particularly in situations where cheap biomass, e.g. agro industrial residues, and waste wood, are available. On the technology side, efficiency of these systems is expected to improve through incorporation of biomass dryers, where applicable, and larger plant sizes as well as higher steam conditions. The steam boiler turbine arrangement, woody biomass is combusted in a furnace of a steam boiler with fluidized bed combustion. Heat released during combustion is utilized to raise high pressure and high temperature steam. This steam is expanded through steam turbine, which in turn drives an electric alternator. Exhaust steam from the turbine is condensed and returned to the boiler. Wood fuel is usually shredded to appropriate size and dried utilizing a part of the flue gas, before the fuel introduced into the furnace. This technology has been in existence in many parts of the world, specifically to produce electricity and motive power in the sugar industry utilising bagasse (residue produced after crushing sugar cane) as the fuel. In this modern version of this technology, wood fuel is shredded into very small pieces and combustion is carried out in a fluidised state. Although this improvement increases the cost of fuel preparation and air supply, it improves the combustion efficiency, thus reducing the operational costs and also reducing stack emission levels. A fluidized bed boiler could accept not only chipped wood but also residues such as rice husk, sawdust etc. This technology is widely used all over the world to generate electrical and motive power from solid fuel. The modern versions have incorporated many new features to improve operational efficiency, thus reducing cost of operation and to reduce emission levels. Some of these improvements are: Increasing the pressure of boiler, increasing the vacuum in the condenser, combustion air pre heating and steam reheating. Figure 11 schematically shows the principle of this conventional system Condenser Flue Gas Figure 11: Boiler-steam turbine system Cogeneration Cogeneration is the process of producing two useful forms of energy, normally electricity and heat, utilizing the same fuel source in an industrial plant where both heat/steam and electricity are needed, these requirements are normally met by using either; 1) Plant-made steam and purchased electricity, or 2) Steam and electricity produced in the plant in a cogeneration system. The second option results in significantly less overall fuel requirement. Steam turbine based cogeneration is normally feasible if electricity requirement is above 500 kW. Biomass based cogeneration is often employed for industrial and district heating applications; however, the district heating option would not be applicable in the tropical countries. A number of studies have been carried out on cogeneration in different agro industries, particularly, sugar mills and rice mills. These show that biomass based cogeneration technology is well established in the pulp and paper industry, plywood industry as well as a number of agro-industries, for example, sugar mills and palm oil mills. Normally, there is substantial scope for efficiency improvements in such cases. For example, bagasse is burnt inefficiently in sugar mills in most developing countries because of a number of reasons, e.g., old and obsolete machinery, disposal problems created by surplus bagasse, lack of incentive for eff icient operation etc. Improving the efficiency of biomass-based cogeneration can result in significant surplus power generation capacity in wood- and agro-processing industries; in turn, this can play an important role in meeting the growing electricity demand in developing countries. India has launched an ambitious biomass based cogeneration programme. A surplus power generating capacity of 222 MW was already commissioned by the end of 1999, while a number of projects of total capacity 218 MW were under construction. The total potential of surplus power generation in the 430 sugar mills of the country has been estimated to be 3500 MW. Co-firing Co-firing is set up as an auxiliary firing with biomass energy source in coal fired boilers. The co-firing has been tested in pulverized coal (PC) boilers, coal-fired cyclone boilers, fluidized-bed boilers, and spreader stokers. Due to fuel flexibility of fluidized bed combustion technology, it is currently the dominant technology for co-firing biomass with coal. Co-firing can be done either by blending biomass with coal or by feeding coal and biomass separately and is a near term low-cost option for the efficient use of biomass. Co-firing has been extensively demonstrated in several utility plants, particularly in USA and Europe. Co-firing represents a relatively easy option for introducing biomass energy in large energy systems. Besides low cost, the overall efficiency with which biomass is utilized in co-firing in large high pressure boilers is also high. Current wood production systems in most countries are dispersed and normally can only support relatively small energy plants of capacity up to 5-20 MWe, although dedicated plantations can probably support much bigger plants in the future. Thus, biomass supply constraint also favour co-firing biomass with coal (with only a part of the total energy coming from biomass) in existing co-fired plants in the short term. Whole Tree Energy (WTE) system: The Whole Tree Energy (WTE) system is a special type of wood fired system, in which whole tree trunks, cut to about 25 ft long pieces, are utilized in the process of power generation in an innovative steam turbine technology that uses an integral fuel drying process. Flue gas is used to dry the wood stacked for about 30 days before it is conveyed to a boiler and burnt. Allowing the waste heat to dry the wet whole tree can result in improvement in furnace efficiency with net plant efficiency reaching comparable value of modern coal fired plants. Stirling Engine A Stirling engine is an external combustion engine; working on the principle of the Stirling thermodynamic cycle, the engine converts external heat from any suitable source, e.g. solar energy or combustion of fuels (biomass, coal, natural gas etc.) into power. These engines may be used to produce power in the range from 100 watts to several hundred kilowatts. Stirling engines can also be used for cogeneration by utilizing the rejected heat for space or water heating, or absorption cooling. A number of research institutes and manufacturers are currently engaged in developing biomass fired Stirling engine systems. For example, the Technical University of Denmark is developing medium and large Stirling engines fuelled by biomass. For 36 kWe and 150 kWe systems, the overall efficiency is about 20 percent and 25 per cent respectively. [..] Gasification Gasification is the process of converting a solid fuel to a combustible gas by supplying a restricted amount of oxygen, either pure or from air. The major types of biomass gasifiers are, Fixed bed gasifier, Fluidized bed gasifier, and Biomass integrated gasification combined cycles (BIGCC) Fixed Bed Gasification Fixed bed gasification technology is more than a century old and use of such gasifiers for operating engines was established by 1900. During World War II, more than one million gasifiers were in use for operating trucks, buses, taxis, boats, trains etc in different parts of the world. Currently, fixed bed gasification shows for the most part possible selection into biomass based power generation with capacity up to 500 kW. Although charcoal gasification presents no particular operational problem, the actual acceptance of the technology by potential users is rather insignificant at present, mostly because of low or no cost benefit that it offers. Also, producer gas is less convenient as an engine fuel compared with gasoline or diesel and the user has to have time and skill for maintaining the gasifiers-engine system. However in situations of chronic scarcity of liquid fuels, charcoal Gasifier-engine systems appear to be acceptable for generating power for vital applications. Thus, sev eral gasoline-fueled passenger buses converted to operate with charcoal gasifiers were reported to be in use in at least one province of Vietnam in early 1990s. As reported by Stassen (1993), a number of commercial charcoal Gasifier-engine systems have been installed since early eighties in the South American countries. Wood gasification for industrial heat applications, although not practiced widely, is normally economically viable if cheap wood/wood waste is available. On the other hand, wood gasifiers-engine systems, if not designed properly, may face a wide range of technical problems and may not be commercially viable. Research and development efforts of recent years have been directed towards developing reliable gasifier-engine systems and the technology appears to be maturing fast. Although the demand for wood gasifiers is rather limited at present, a number of gasifier manufacturers appear to have products to offer in the international market. Gasification of rice husk, whic h is generated in rice mills where a demand for mechanical/electrical power also exists, has attracted a great deal of interest in recent years. The rice husk gasifier design that has found quite wide acceptance is the so-called Open Core design that originated in China; this is basically a constant diameter, (i.e. throttles) downdraft design with air entering from the top. The main components of the gasifier are an inner chamber over a rotating grate, a water-jacketed outer chamber and a water seal-cum ash-settling tank. Gasification takes place inside the inner chamber. The char removed by the grate from inside the gasifier settles at the bottom of the water tank. At present, 120 to 150 rice husk gasifiers appear to be in operation in China. A third of the gasifiers are in Jiangsu Province; these include about thirty 160 kW systems and about ten 200 kW systems. A number of rice husk gasifier systems have been shipped to other countries namely, Mali, Suriname, and Myanmar. A husk g asifier system of capacity 60 kW was developed in 1980s to use in smaller mills in the developing countries. This prototype was successfully used in a mill in China, although no other such unit appears to have been built or used. Beside rice husk gasifiers, several other gasifier models have also been developed in China. Presently, more than 700 gasification plants are operating in China (Qingyu and Yuan Bin, 1997). As a result of several promotional incentives and RD support provided by the government, gasification technology has made significant progress in India in the recent years. Up to 1995-96 about 1750 gasifier systems (Khandelwal, 1996) of various models were installed in the different parts of India. The total installed capacity of biomass gasifier system in India by 1999 is estimated to be 34 MW. Besides generating electricity for the local community, it is estimated that the project has also benefited about 11,000 people directly or indirectly. Fluidized Bed Gasification Fluidized bed gasifiers are flexible in terms of fuel requirements, i.e. these can operate on a wide range of fuels so long as these are sized suitably. However, because of complexity in terms of manufacturing, controls, fuel preparation and operation, these gasifiers can only be used for applications of larger capacities compared with fixed bed gasifiers, typically above 2.5 MW. Biomass integrated gasification combined cycle (BIGCC) technology In the gasification gas turbine technology described above, an overall maximum efficiency attainable is 20%. This could be substantially improved, by raising steam utilizing the gas turbine exhaust and driving a steam turbine. A number of BIGCC power plants are in operation in countries such as Sweden and Finland. Gasifier-internal combustion (IC) engine technology In this arrangement, solid wood is first dried and shredded into appropriate size and then converted into a combustible gas in a gasifier. Gasifier is a cylindrical reactor with a throat section, which is narrower than the rest of the reactor. In this throat section, air is introduced through a set of tubes. Wood dried to a maximum of 20% moisture level and shredded into appropriate sizes is introduced at the top of the reactor through an air lock. Up draught gasifiers are widely used for heat applications as they are easier to construct and are more energetically efficient. Such gasifiers are rarely used for motive power or electricity generation purposes due high tar levels in the gas stream. Wood Gasifier Gas Cleaning IC Engine Generator Gas Gas Exhaust Electricity Chart 01: Gasifier-Gas Cleaning-Engine System As the material slowly passes through the reactor, it undergoes physical and chemical changes in the many overlapping zones. First the material is dried in the drying zone, losing all the remaining water. Then the material is pyrolysed into solid char and volatiles. In the next zone the combustion or oxidation zone at the throat of the gasifier, all the volatiles get combusted into carbon dioxide and water. This section liberates all the heat required for the gasification process. In the expanding section below the throat section known as the reduction zone carbon dioxide and steam produced in the upper sections are made to react with carbon, which has reached red-hot stage. In this reduction zone, carbon dioxide and water reacts with carbon to form carbon monoxide, hydrogen, methane and other hydrocarbon mixtures. The oxidation is essentially an exothermic process liberating heat in the action, whereas the reduction zone is an endothermic process making use of heat. The gas mixture so produced is called producer gas. Un-burnt materials in the wood end up as ash and are collected and periodically removed from the bottom. Hot producer gas leaves the gasifier at the bottom of the gasifier under the action of an induced draft fan. Air for combustion in the combustion zone is drawn into the section due to low pressure created under the action of the induced draft fan. Producer gas leaving the gasifier, if mixed with air can form a combustible mixture. It can be used as a fuel in internal combustion (IC) engines or in furnaces or boilers. To be used in IC engines, the gas needs to be treated further. First it must be cooled to improve the volumetric efficiency (to facilitate the introduction of maximum quantity of fuel into the cylinders of the engine). This is done by a jet of water. The water jet also washes away a part of the tar and particulates in the gas. Then the gas needs to be thoroughly cleaned of all traces of tar and particulate matter. This is achieved by passing the gas through a series of filters. If the gas is to be used as fuel in a furnace or a boiler, the cooling and filtering operations may be omitted. If the gas is to be used as fuel for IC engine, then the gas mixed in the correct proportion of air is admitted to inlet manifold. In respect of spark ignition type of IC engines (petrol or natural gas engines), producer gas alone can operate such engines. For compression- ignition type of engines (diesel engines), it is necessary to utilise a minimum quantity (less than 5%) diesel fuel as the ignition source in a well optimised engine. When standard IC engines are fuelled with producer gas, the maximum output of the engine gets de-rated. In respect of spark ignition engines, this de-rating is about 50% (i.e. the new output is 50% of the name plate output). In respect of compression ignition engines, it is insignificant if 30% diesel fuel is used as pilot fuel. This technology to use producer gas from biomass fuel was popularised during the Second World War in the 1940s. During this war, distribution of petroleum fuel was disrupted and was in short supply. Many countries, particularly, USA and Sweden utilised this technology for transport vehicles. With the end of the war, the supply of petroleum was restored and this technology was discontinued. With the increase in cost of petroleum in the 1970s with the formation of OPEC, this technology has once again gained popularity, particularly for off-grid application for decentralised electricity production. In many Asian countries such as India, Cambodia and Sri Lanka this technology is becoming very popular for off-grid applications. In Sri Lanka, this technology was used prior to the introduction of Grid Electricity. In the earlier version, coconut shell charcoal was used as the fuel for the gasifiers. Producer gas from these gasifiers was used to drive slow-speed IC engines. Motive power of the engine was used to drive a single over-head shaft with multiple pulleys driving individual drives. Later, the IC engines were fuelled with furnace oil with injectors and hot bulb. When grid electricity was popularised, these devices were discontinued. At the Government Factory at Kollonnawa, near Colombo, remnants of this system are still available to see. With the increase in oil prices in the 1970s, interests in new and renewable energy resources surfaced again. A few gasifiers with IC engines were introduced through donor-funded projects. Attempts were made by many research institutions to develop this technology locally. These attempts were successful in varying degrees. With the declining oil prices in the late 1980s, the enthusiasm shown in renewable energy declined. Almost all the gasifiers system in the country became inoperative. Three years ago, a team of officials visited India to identify gasifier-IC engine systems for local adaptation. Later a 35kWe system was introduced from India by the Ministry of Science and Technology. For the past two years, this has been operating as a demonstrating unit for off-grid electricity generation. This system will be relocated to a rural area shortly to serve an isolated village community. The 35kWe system consumes 1.6 to 1.8 kg wood per kWh of net electricity generated. Figure 12 below shows a photograph of this system in operation. Figure 12: 35 kW gasifier-IC engine generator Gasifier-gas Turbine Technology The gasifier-IC engine system described in the previous section is more suitable for outputs in the kW to say 1 MW range. To use gasifier system for larger applications in the multiple MW range, gas turbine technology is generally more suitable. A schematic diagram of this technology is shown in 13. Gasifier Biomass Clean-up Flue Gas Gas Turbine Air Ash Figure 13: Gasifier gas turbine technology Biomass integrated gasification steam injected gas turbine (BIG/STIG) technology Gasifier Biomass Clean-up Flue Gas Steam Turbine Condenser Gas Turbine Air Ash A method of improving the efficiency and output of the above-described BIGCC technology is to inject steam into the gas turbine combustor. This increases the output of the gas turbine without consuming power at the compressor. This technology requires very stringent water purification system and other control measures. At this early stage of biomass technology for power generation in Sri Lanka, such complicated technologies are not considered. Figure 19 illustrates this principle. Figure 14: Biomass integrated gasification steam injected gas turbine (BIG/STIG) technology 4.7 Conclusions Table03: Typical capacity/efficiency/resource data for biomass power systems System Power kW* Energy efficiency % Biomass dm tonnes/yr ** Comments Small down draft gasifier/IC engine 10 15 74 High operation maintenance, and/or low availability, low cost Large down draft gasifier/IC engine 100 25 442 High operation maintenance, and/or low availability, low cost Stirling Engine 35 20 177 Potential good availability, under development, high cost Steam Engine 100 6 1840 Good reliability, high cost Indirect-fired gas turbine 200 20 1104 Not available commercially Pyrolysis/IC engine 300 28 1183 Under development Rankine Organic Cycle 1000 18 6133 Commercial Updraft gasifier/IC engine 2000 28 7886 Commercial Fixed grate or fluid bed boiler/steam turbine 2000 18 12270 Commercial Fluid bed (BIG/CC) à ¢Ãƒ ¢Ã¢â‚¬Å¡Ã‚ ¬ dedicated biomass 8,000 + 28 29710 Demonstrated Fluid bed gasifier co-fired 10,000+ 35 31500 Commercial Notes:- * Indicative of range for application ** Assumes: availability at 70%, fuel net calorific value 20 MJ/kg

Queen Elizabeth 1 Essay -- essays research papers

Elizabeth I (also known as Elizabeth the Great, or the "Virgin Queen") was born in 1533 into a dangerous world of political intrigue. When she was only two years old, her father, King Henry VIII killed her mother, Ann Boleyn, because she had not yet produced a male heir. Henry's routine killing of her successive stepmothers every few years traumatized Elizabeth, who loved her father. Although Henry finally did father a son, Edward VI, the boy did not live long, dying at the age of sixteen after a six-year reign, and thus Elizabeth's older sister Mary I came to the throne in 1553. Meanwhile, the young Elizabeth showed exceptional intelligence, excelling at her studies well beyond any of the other royal children. A Catholic, Mary married the Hapsburg prince of Spain, the soon-to-be Philip II. Mary would come to be known as "Bloody Mary" for her harsh treatment of English Protestants in her attempt to restore Catholicism to England. When Sir Thomas Wyat the Younger's Rebellion threatened Mary's rule, she believed Elizabeth to have been involved in the plot and imprisoned her in the Tower of London. By a combination of luck and skillful persuasion on the part of her political allies, Elizabeth survived this ordeal and became queen when Mary died in 1558. Elizabeth quickly consolidated power and returned the country to Protestantism, passing the Acts of Supremacy and Uniformity, although by Reformation standards Catholics fared well under these acts. Wi...

The Importance of Reading Essay -- Teaching Education Essays

The Importance of Reading â€Å"Why do you read all the time?† A frequently asked question of my past and I still find it repeated even now as I have entered a higher class of the educated. Whenever posed with this blatant criticism of my preferred free time activity, I simply answer with â€Å"Why don’t you read all the time?† Of course I might sound like the biggest geek that ever walked the face of the earth, but the fact of the matter is that no matter what negative stereotype is attached to those who read, it has never stopped me from continuing to pursue my joy of literature. I am a firm believer in the power of a book and that the fact that the more well read you are the better chance you have of relating to entirely different groups of people. Ever since I can remember, my father has encouraged me to read. I suppose that it is due to his poor background that he is so inspired by books. As a result, I was reading Shakespeare before most could even pronounce his name. Captured by the amazing usage of words in the old Elizabethan era, I was spurred to read more by past British writers and they remain to this day my preferred choice of books. This is not to say that I am not a fan of the more modern author on the contrary, I read all genres and believe that each have their own additions to the literary world. However, none of them can compare to my all time favourite author, Jane Austen. First introduced to her when I was about twelve years old, I was instantly captured by her style of writing and her personal background. She is the most famous feminist writer of her time but was only truly celebrated after her death, to my own sentimental twelve-year-old heart that seemed so tragic and was automatically my reason to sympa... ... read finding great pleasure in a book. After knowing what I know about what books have brought to my life I feel sorry for those who cannot simply enjoy a novel instead of watching a movie. Even though I too have grown up in a society that is primarily film oriented and it has definitely been a part of shaping me, I am proud to say that I am more well rounded than that and have many levels and other things that have shaped who I am. My view on the world and its issues is broader and I have a better way of thinking of the world being better aware of the social differences within groups of people and the impoverished people that are scattered across our globe. I owe this all to my father who introduced me to literature and the greatness that it can hold for someone who is ready to accept it and step into the many lives and worlds created by ink and paper.

God and the Absolute Law :: Religion Theology

God and the Absolute Law This vast universe, which we understand so little of, is governed by a set of rules and principles which were laid down since the dawn of time. The universe was created by God and it is He who laid down these rules. It is also He who created time and then created life out of nothingness. While doing so, He also instructed us how to spend our lives and told us what is right and what is wrong. In other words, He told us what to do and what not to do, and we, each and everyone of us, is bound to concur and abide by these rules. Culture and race is irrelevant ; these laws are absolute and are meant for every individual. One of the laws and/or rules tells us that the human body and the soul is not our own and we have no right to harm it in any way. We do not own them since it is not us who gave them form but it is God who gave them to us for a finite period of time. We value this human life and it is our natural instinct to save ourselves from any harm. It is every man^s constant will to survive. This is a form of an absolute law which governs our every action. It cannot be called a fabrication of mankind because ever since the dawn of time, every human being has fought for his/her own survival. It is ingrained into our nature to try to protect ourselves. So it must be absolute. Theft is another aspect of life which is governed by an absolute law. God gave us life and he provides for each and everyone of us. He bestows us with what we deserve ; nothing more, nothing less. And He told us that we have no right to steal anything from anyone else because it does not belong to us and was not meant for us. This concept, that stealing some else^s property is bad, is also included in mankind^s nature. And therefore it is an absolute law. Examples of thieves and robbers do not refute the existence of the absolute law because they are just people who do not have a strong belief in themselves. They fail to realize that they have everything they deserve and that they should be thankful for what they do have. God and the Absolute Law :: Religion Theology God and the Absolute Law This vast universe, which we understand so little of, is governed by a set of rules and principles which were laid down since the dawn of time. The universe was created by God and it is He who laid down these rules. It is also He who created time and then created life out of nothingness. While doing so, He also instructed us how to spend our lives and told us what is right and what is wrong. In other words, He told us what to do and what not to do, and we, each and everyone of us, is bound to concur and abide by these rules. Culture and race is irrelevant ; these laws are absolute and are meant for every individual. One of the laws and/or rules tells us that the human body and the soul is not our own and we have no right to harm it in any way. We do not own them since it is not us who gave them form but it is God who gave them to us for a finite period of time. We value this human life and it is our natural instinct to save ourselves from any harm. It is every man^s constant will to survive. This is a form of an absolute law which governs our every action. It cannot be called a fabrication of mankind because ever since the dawn of time, every human being has fought for his/her own survival. It is ingrained into our nature to try to protect ourselves. So it must be absolute. Theft is another aspect of life which is governed by an absolute law. God gave us life and he provides for each and everyone of us. He bestows us with what we deserve ; nothing more, nothing less. And He told us that we have no right to steal anything from anyone else because it does not belong to us and was not meant for us. This concept, that stealing some else^s property is bad, is also included in mankind^s nature. And therefore it is an absolute law. Examples of thieves and robbers do not refute the existence of the absolute law because they are just people who do not have a strong belief in themselves. They fail to realize that they have everything they deserve and that they should be thankful for what they do have.

Dansk Minox Case Study Essay

Introduction My name is Kevin Chen and I am a senior consultant of the Boston Consulting firm. Per the request of the A/S Dansk Minox, a food products manufacturer, I am preparing this analysis to identify the existing problems within the business of A/S Dansk Minox and provide possible recommendations. As a consultant, I will present the analysis without bias and for the best benefits of A/S Dansk Minox. In the following analysis, I am going to answer the following question: Should A/S Dansk Minox bring the new product, complete meal, to the market?Company backgroundThis case is set in Denmark in 1967 when the â€Å"boom† in consumer food products was just beginning more working mothers, more disposable income, more choices in convenience food products. A/S Dansk Minox, a company in Denmark, specializes in manufacturing a variety of vacuum-packed meat and other products. DM has about 30 products and has a great position and brand in the market. A/S Dansk Minox provides the vacuum packed products and consumers combine the vacuum packed packages along with the homemade salad for their meal. Through consumer research, A/S Dansk Minox recently identifies that there is a huge market potential for vacuum packed complete meals. The meal contains a standard â€Å"sliced pork in gravy†, the product that A/S Dansk Minox is making, with 550 grams of red cabbage salad. Vacuum PackingVacuum Packing is a storage method that preserves variety of food. For example, pork, beef or vegetables. If properly refrigerated or frozen, vacuum packaging works well in keeping the food fresh for longer periods. The plastic bags are usually used to vacuum packaged. The air is removed creating a vacuum in the bag and the food is left in the bag. In order to maintain vacuum, the bag is sealed. By the researches from Fante’s Kitchen Wares Shop, there are a lot of benefits for vacuum packing:1. Longer storage life of foods. According to researches, foods maintain their freshness and flavor 3-5 times longer than with conventional storage methods, because they don’t come in contact with oxygen. Due to the elimination of air to absorb the moisture from the food, vacuum packing prevents dry out of moist foods,Because bacteria mold and yeast cannot grow in a environment without oxygen, foods maintain their original appearance. Insect infestation is eliminated because there’s no oxygen coming in the bag. The production process of vacuum-packed products can be illustrated by the flow chart 1) attached in appendix. Business environment:The current business environment that A/S Dansk Minox operates in can be analyzed as follows. Threat of New Entrants and Barriers to EntryAs the customer research done by A/S Dansk Minox revealed, there is still market opportunity for the vacuum packed products. In order to produce vacuum packed products, for example pork, vegetables, it is necessary for companies to purchase the production equipments for the procedure of vacuum packing, meat cutting, sorting and packaging. It is crucial to purchase the machines that reduce production time and cost, increase efficiency. Therefore, in order to enter into this market, the initial capital investment in purchasing equipment could be substantial and it creates barriers to entry. However, the equipments are relatively easy to operate, so the training cost and time to the workers could be minimal. Moreover, the food product manufacturing industry is not technology intensive and the equipment could be purchased in many distributors, this factor in turn makes the new entry easier. Also, once the initial machines purchased, it is relatively easy to introduce new product lines. Intensity of Rivalry Among CompetitorsThere are a number of vacuum-packed cooked products manufacturers also in the business. Certain competitors of A/S Dansk Minox are expanding aggressively and had already introduce the red  cabbage salad in vaccum-packed, canned or frozen form. There is low differentiation among competitors and price is the key factor in this particular industry. Due to the high initial investment, the potential exit barriers could be high in this diverse competitive industry. Product SubstitutesFor this particular product of vacuum-packed red cabbage salad, the Danish housewives very often make it on their own. Therefore, the family could choose make the salad or buy it from A/S Dansk Minox. The switching costs are fairly low and the family could have a choice of buying the products from other manufacturers if the price and quality match their standard. In term of food storing methods, the red cabbage salad could be in the canned or frozen form as well. They are the substitutes depend on the family’s preference and evaluation of price and quality. SuppliersThe suppliers of A/S Dansk Minox are the vendors that provide raw material of pork, cabbage and other possible material for the process of packaging. Since pork and cabbage are consumption goods, the price is affected by the demand and supply of the material. Luckily for A/S Dansk Minox, the suppliers will not have huge bargaining power since the material of pork and cabbage is wildly available in the market and the supply chain is considered to be relatively stable. BuyersSince the pork and salad are very popular food in Denmark, so the potential buyers of the product could be anyone in the country. Since people now have more disposable income to spend on food products, also the vacuum-packed products like pork and cabbage are wildly considered as more convenient products,More specifically, the women in the work force, working mothers, represent the increasing portion of the buyers. Since this salad is quite time-consuming to prepare at home, the working mother prefer to purchase pre-prepared vacuum-packed products. The complete meal products are the perfect products for them. Company Strategy:The strategy of the A/S Dansk Minox is Cost leader. A/S  Dansk Minox is operating in a large market and the potential customers could be any family in the country. The demand of vacuum packed product by is highly elastic, which means the demand of the products are highly influenced by the price. In order to maintain a competitive price and compete with the competitors, A/S Dansk Minox produces the products massively. Strength:Biggest strength of the organization is the brand loyalty that already exists. Having 30 products in the market, A/S Dansk Minox is wildly recognized by the consumers and is a trusted name. Once the new products introduced, it could enjoy the benefits of being a line of the company. Opportunity:By conducting a consumer research, A/S Dansk Minox recently identifies that there is a huge opportunity for vacuum packed complete meals, even the competitors already introduce the ready-made red cabbage salad to the market. The opportunity came from the facts that the disposable income of people increases, resulting in more spending on food products. More and more people prefer convenient food to making it by themselves. In addition, the ready-made combo of â€Å"complete meal† is especially to working mothers, who want to reduce their time on the time-consuming salad dish. The percentage of working mother in the work force is expecting to increase in the future, reflecting the great opportunity of introducing the new complete set product. The major problem that A/S Dansk Minox facing now is: Should A/S Dansk Minox bring the new product, complete meal, to the market? If yes, then how much the unit price should be?The price is uncertain due to the cost allocation problem raise by the new product, leading to long discussions between the marketing and finance departments. Company identifies the cost driver as ‘per kilogram’ of material and the new product price at D.Cr 8.20 is proposed by finance department. Marketing department suggests that the cost driver ignores the price of cabbage is way cheaper than pork, however allocating a similar overhead cost. Hence they proposed a price of D.Cr 6.85 for the combo pack. In order to find the solution for the problem above, I will examine the  following three alternatives:Summary of alternativesABCStatus Quo: Not introduce the â€Å"complete meal product†; abandon the new projectIntroduce the â€Å"complete meal product† at a consumer price of D.Cr. 6.85Introduce the â€Å"complete meal product† at a consumer price of D.Cr. 8.20Alternative A: Status QuoAlternative A is to abandon the new project of New Pack – not to introduce the â€Å"complete meal product†. As the new product will not be introduced, it will generate no additional profit to the company, i.e. the profit in 1966 will be the net profit without the introduction of the new product. Consequently, the pricing arguments between the marketing and finance departments of the Danish company will no longer exist. In addition, since the new product is not introduced into the market, the customers of the standard pack will stay with the products. Accordingly, th e sales of the old product will continue to rise in response to the increase in the market demand. Alternative A: Not introduce the â€Å"complete meal product† New PackSales:0Total variable costs0Allocated fixed costs0Profit0Alternative B: Introduce at a consumer price of D.Cr. 6.85Since there was spare capacity available for the production of the new â€Å"complete meal† product, the total amount of the fixed costs will not change due to the proposed production of the new product. Also because these fixed expenses are costs that have already been incurred and that cannot be recovered, they are considered as sunk costs. In business decision-making such as the decision to add or drop a product or service, only incremental costs (variable costs) are relevant to a decision. Therefore, the full costing method (the standard cost accounting) – the attempt to allocate the company’s fixed costs to the different products produced during a certain period of time, is not appropriate for this type of management decision making. The proper approach to support decision making to improve a company’s profitability is a contribution analysis:Revenue – Variable Costs = Contribution Margin per unit(Contribution Margin per unit x total units produced) – Total Fixed Costs = Incremental Profit/LossAs a result, the company’s profit in 1966 will be increased by $99,450 (See Table 1 for detail) if the new product is introduced at a consumer price of D.Cr. 6.85. Compared to Alternative A, A/S Dansk Minox is better off by the increase of $99,450 in profit. In the event that the company is not capable to produce 85 tons of new products, the profit increased above will not be achieved. From the table shown below, in order to achieve the profit by selling 30 tons new products at D. Cr 8.20, we need to at least sell 52 tons of new product at D. Cr 6.85. Contribution Margin for a consumer price of D.Cr. 6.85 x Minimum sales volume= incremental profit for introducing the product at a consumer price of D.Cr. 8.201.17X = 60,900 *X = 52,051* see alternative C for detailLong term decisionHowever, the contribution analysis is primarily useful for short-term decision-making. For the long-term purpose, the company still needs the full costing analysis to calculate the profit of each product. Within company’s capacity, the production Fixed Expense for the new â€Å"complete meal† will be the same as existing products as D.Cr. 0.54 per kilo. All other overhead will be the same as the existing product as well. In the event of exceed capacity, need to allocate additional Production Fixed Expenses. in order to get the correct number of profitability, A/S Dansk Minox needs to find an appropriate cost driver to allocate the production fixed expenses. As indicated by the marketing department, the total sales quantity (expressed in kilograms) may not be a proper way to allocate the fixed costs. A/S Dansk Minox could consider using the selling price of product as the allocation basis, since the consumer price is more relevant to the fixed overhead and better matching expense with profit. Therefore, from the following table, we proportional apply the Production Fixed Expense:new packStd.Pack6.854.85X0.54X=0.76Therefore, in the long run, 0.76 production fixed expense should be allocated to 1 Kg of â€Å"complete meal†. Please note that we assume selling price at D.Cr. 6.85. In the case of retail selling price as D.Cr. 6.85 and with an allocation of D.Cr. 1.20 for production fixed expenses, the total unit cost will be D.Cr. 5.22. Alternative C: Introduce at a consumer price of D.Cr. 8.20In spite of the marketing department’s arguments, company could decide to set the price at D.Cr. 8.20 so that the full fixed expense could be covered. In this case, the uncertainty of allocating fixed overhead is eliminated and the company ensure that the new product is making profit. However, the selling price is too high for the customer in turn decreases the competitiveness of the product. Therefore, the product could be sold at a lower volume than it is budgeted. In the following, we reasonably assume that the sales volume drop to 30 tons when the price is at D.Cr. 8.20. Please see table 2 at appendix for detail. The profit in 1966 will be increased by $60,900. Compared to Alternative A, A/S Dansk Minox is better off by the increase of $60,900 in profit. ConclusionsIn order to better evaluate and compare all the qualitative and quantitative alternatives we analyzed above, we need to take into consideration of certain key decision-making criteria:1.Improve profitability (measured by contribution analysis, short-term decision making)Increase profitability and improve shareholder equity is the primary goal of a company. By improving profit, the company’s cash flow is possibly increased, so that company’s ability of meeting liability is enhanced. In the event of possible investing opportunity arises, the company will be financially flexible enough to take it. 2.Consistent with the corporate strategyThe alternative we take should be consistent with the strategy of the company, so that the action will be towards the company goal and will be sustainable. 3.Lost of customers by the Standard PackTo better evaluate the alternatives, some important qualitative factors should be considered, potential lost of customer by standard pack resulting from the introduction of the new product is one of them. 4.Within capabilityAre the alternatives attainable? Or they are out of the capacity of the company and will not be able to achieve?The following table shows how we compare the different alternatives by applying these criteria:ABCStatus Quo: Not introduce the â€Å"complete meal product†; abandon  the new projectIntroduce the â€Å"complete meal product† at a consumer price of D.Cr. 6.85Introduce the â€Å"complete meal product† at a consumer price of D.Cr. 8.20Improve profitability using contribution analysis (short-term decision making) NoAssuming 85 tons of new products are sold at price of D.Cr 6.85, so the profibility will be improved by D.Cr. 99,450Assuming 30 tons of new products are sold at price of D.Cr 8.20, so the profibility will be improved by D.Cr. 60,900. Consistent with strategyN/AThe company’s strategy is cost leader, the price of D.Cr.6.85 is consistent with the company’s strategy and increase the competitiveness of the company.The company’s strategy is cost leader. the price of D.Cr.8.20 might be too high for certain customer, resulting in losing the competitiveness of the company. Lost of customers by the Standard PackNoIt is confirmed that there is still a great untapped potential for the new product so the customer will continue to buy both new and old products. Sales of standard pack will not be affected.Since there is still a great untapped potential for the new product so the customer will continue to buy both new and old products. Sales of standard pack will not be affected. Within capabilityN/AThere are spare capacity available for the company and the production will not exceed at this moment. If the new product keep increasing in the future, there is possibility of exceeding budgeted capacityThere are spare capacity available for the company and the production will not increase too much due to the high selling priceIn conclusion, by comparing the alternatives against the key decision-making criteria, alternative B, which introduces the â€Å"complete meal product† at a consumer price of D.Cr. 6.85 is the best option for A/S Dansk Minox. Since the main goal for A/S Dansk Minox is generating higher cash flow, improving profitability should be the primary criteria that we should consider in decision making. Alternative C improves profibility by D.Cr. 99,450, which is D.Cr 38,550 higher than alternative B and D.Cr 99,450 higher than alternative A. Moreover, alternative B is consistent with the company strategy. From the content that we demonstrated previously, the business strategy of the company is cost leader. A/S Dansk Minox produces the products massively in order to keep a low selling price and match with the competitors. Therefore, introducing the new product price at D.Cr. 6.85 does a better job in fitting in company’s strategy than the other alternatives. In addition, alternative B will not have huge impact to the existing products and it works within the capability of the company, comparing to other options. Recommendations A/S Dansk Minox is facing an exciting opportunity of introducing a new product line that could possibly increase the profit hugely. We highly recommend the company introduce the new â€Å"complete meal† at price of D.Cr. 6.85, also taking the following steps:1.Introduce the â€Å"complete meal† to the whole company and the public as soon as possible in order to let more people know about the new product. 2.Inform the production department and add the new product into production plan. Evaluate the difficulty of implementing the new product line. 3.Inform the marketing department. Ask for possible promotion theme and plan that could make the biggest sales impact. 4.Call retailers at each level of selling channel regarding the introduction of the new product. 5.after few months, conduct customer research in order to evaluate the success of the new product or possible commandsNot only alternative C is a solution that relatively easy to be implemented, it is also expected to generate highest cash flow to meet the company’s operating goal. By setting the price of new product at as low as D.Cr. 6.85, the demand of the product remains high and the company strategy of cost leader will be maintained. Introducing the new â€Å"complete meal† increase the competitiveness to utilize  the company’s strength and help company to survive in this highly competitive market. Appendices:Flow chart 1)Table 1Alternative B: introduce the â€Å"complete meal product† at a consumer price of D.Cr. 6.85New PackConsumer Price6.85Turnover Tax(0.76)Consumer Price Before Tax6.09Retailer’s Margin (1.31)Price to Retailer4.78Variable Costs:Material: Pork 1.67Labor: Pork 0.25Material: Cabbage 0.5Labor: Cabbage 0.25Packaging 0.26Transportation, Storage0.2Margins and Discounts to Wholesalers 0.38Sundry Variable Costs 0.1Total Variable Costs(3.61)Contribution Margin1.17Sales volume @ 85 tons 1x 85,000 kgIncremental Profit99,4501 Assume the actual sales volume of the â€Å"complete meal product† is the same as the sales budget when the â€Å"complete meal product† is introduced at a consumer price of D.Cr. 6.85. Table 2Alternative C: introduce the â€Å"complete meal product† at a consumer price of D.Cr. 8.20New PackConsumer Price8.20Turnover Tax(0.91)Consumer Price Before Tax7.29Retailer’s Margin (1.57)Price to Retailer5.72Variable Costs:Material: Pork 1.67Labor: Pork 0.25Material: Cabbage 0.5Labor: Cabbage 0.25Packaging 0.26Transportation, Storage0.2Margins and Discounts to Wholesalers 0.46Sundry Variable Costs 0.1Total Variable Costs(3.69)Contribution Margin2.03Sales volume @ 30 tons 1x 30,000 kgIncremental Profit60,9001 The actual sales volume of the â€Å"complete meal product† is 30 tons when the â€Å"complete meal product† is introduced at a consumer price of D.Cr. 8.20bibliographiesA/S Dansk Minox Gordon Shillinglaw, Columbia University ISBN 0-538-88967-5 to Accounting

The Act Of Bullying In Schools Education Essay

intimidate is the practise whereby a individual put ups, persecutes or regular(a) intimidates a weaker individual. This is one act which is profoundly rooted in teachs where the seniors all overhear advantage of the juniors and maltreat them a gravid trade wind. The strong-arming action involves m either incidences of combat, in which type the toughs involve themselves in battles with the different pupils ( Whitted & A Dupper, 2010 ) . The victims of much(prenominal) an action ar to a greater extent frequently faced with quite a figure of line of reasonings which argon non encouraging. These whitethorn populate of disquietedness, very junior-grade ego regard, feeling, re altogethery low-self assurance, and even distressing self-image ( Whitted & A Dupper, 2010 ) . The victims may be so much bear on that they start losing engagement in tutor. both(prenominal) the toughs and those bullied show hapless psychosocial operation than those who be wholly un ba ffling ( Nansel et al, 2009 ) . This translates to real low initiate at escapeing and attendant hapless public presentation in the inculcateman circles.This is so a major crinkle which packs to be addressed with all told(a) the earnestness that it deserves. How forever, the teachers, in the procedure of visiting this mystifier, may chase away up passing instructional clip on the same, just aboutthing that affects the overall pedantic criterions in the long tally.Background finishing with this facet of military posture in educates has render a teething business to to the highest degree instructors. High profile degrees of draw be just about dealt with, except strong-arming is one naturally of force which is non considered to be utmost but ought to be take overn attention of, lest it brings downwards the criterions of instruction due to its inauspicious effects. Harmonizing to question which has been carried out in the recent times, bullying has been found t o hold really fat power pointed effects on the general attainment ambiance of a school. The ability of comely acquirement by the pupil is exceedingly affected due to apprehensiveness. This is brought approximately by the torment and all signifiers of bullying associated with bullying patterns. If this job is non corrected, it can take to other signifiers of force, which might be more severe ( Whitted & A Dupper, 2010 ) . Back in the yr 2001, the No Child Left seat Act of 2001 ( NCLB ) , a jurisprudence which was passed in the United States of America, sees unto it that safety in the school is upheld and of major importance to the school needion. Schools which atomic number 18 considered to be mature with job behaviours and thusly insecure ar marked, and their pupils permitted to strike to safer schools. However, those schools which be considered to be safe demand be in the same vicinity or part. This shows the earnestness with which the facet of force, and in this exemplify intimidation, is taken with.Bullying, as one of the major job behaviours in schools, can really hold sedate reverberations on all the parties involved in it, and are at times long-run. The victims ever arrive a batch of jobs. They try to sequester themselves and this leads to depression and a feeling of insecurity at all times ( hayrick & A Casar, 2009 ) . Students tend to detest and fear travel to school, one thing that leads to many school dropouts ( Whitted & A Dupper, 2010 ) . The toughs likewise suffer emotionally and their societal lives may be scoured in the long tally. These toughs may stop up in unsafe packs and groups in future. These are the people who get involved in condemnable activities and stop up macrocosm a menace to the society. at that placefore, the in the beginning this job is taken attention of, the better. The informants besides bear some effects. Reports indicate that informants of these strong-arming actions suffer fright of being the f ollo boostg victims and label of such mistreatments. They on that dosefore suffer hurt and are ever unhappy close the same. This translates to hapless public presentation in their faculty members since they concent govern on how to forfend the toughs and being the latter s quarry, kinda than concentrating on faculty members ( Chandler et al. ) .Anti-bully plans which are to win at the school degree need to aim the kids as persons. This give pay heed in altering the manner the pupils function and comprehend the solely affair, which translates to a safer acquisition milieu. To accomplish this, all the parties have to be profoundly involved in these plans, that is, the victims, the toughs, those who security guard these actions, and even their households ( Whitted & A Dupper, 2010 ) . For these types of plans to bear fruit, the instructors and conclusiveness makers must ever demo their involvement by manner of to the full fend for uping the plan. This involves passing fu ndss on them and guaranting that the plans are taught in family by manner of rootless them in the course of hear.The instructors should take a smashed stand on etiquette and pleasurable behavioral tendencies amongst the pupils. School regulations need to be developed which prohibit strong-arming at all costs. Everybody in the school, need to take it as his or her ain enterprise to control this vice and convey it to an terminal. No 1 should excuse this type of behaviour, and more so the caput of the establishment. The decision makers should affect everybody in coming up with policies that address this job and the policies need to be written 1s and distributed to the whole school community. ace such policy should clearly specify what intimidation is and most likely a coverage arrangement which is rather confidential. This will travel a long manner in promoting those who are victimized or have witnessed such an action in the establishment to secernate without fright of being known ( Nansel et al, 2009 ) . An judgment of the advancement of the anti-bully plans is supposed to be use in army to cover properly with this frailty. This can be through with(p) in signifier of questionnaires which are distributed most frequently. finished such appraisals, consciousness is created in the school and aid to take a firm stand the importance of good behavioral patterns. Such an appraisal besides financial aid in the procedure of coming up with other schemes such as programs of implementing the plans which are set, since everyone is involved. Now that everyone is involved, consciousness and cognition over the same is enhanced, one thing that cooperate cultivate virtuousnesss such as empathy in the pupil s lives. fuss parameterThe general refresh is how the instructors covering with strong-arming during the category that involve bodily maltreatment, mental, and badgering that may ensue in hapless pedantic public presentation for the victims. The job of th is regard is instructors taken the clip to turn to Acts of the Apostless of force in the schoolroom diminish instructional clip.Bullying is one pattern which is of a major concern to all schools. non merely does it impact the academic criterions of the pupils and the school in general, but besides leads to wear away of the behaviours and ethical motives of those involved, in particular the toughs. This job postulate to be sorted out for there to be a good and broad environment for larning to take topographic point efficaciously. Research has proven that most instructors take strong-arming for granted. They take it as mere childhood wonts and behaviours. The dining hall torment patterns, for illustration, are normally overlooked, and this forms the footing for this type of regurgitate behaviour that needs to be make off with ( Whitted & A Dupper, 2010 ) . The job arises where the instructors tend to pass clip covering with intimidation instances, clip which could otherwise be utilize in productive academic work. This is because they are involved to the full in the decision-making procedures, which acknowledge coming up with policies which may be used in covering with this job. death penalty of these policies is besides time-consuming particularly where they are floated after there is an dismaying rate of strong-arming incidences. Both school and student-intervention methods discussed earlier on should be implemented in order to cultivate an environment which is friendly and clean to cover with. Teachers who have incorporated book of book of instructions on strong-arming into their instruction course of study find it easy to cover with this frailty in ulterior yearss. This is because the pupils learn to pry each other and incidences of strong-arming are greatly reduced.A qualitative descriptive interrogation methodological analysis is appropriate mend transporting out this survey since it entails inside informations refering the ideas of peop le, particularly the instructors and their sentiments. The population group has to affect loose inquiries and a physical instruction instructor from Jacksonville, FL Schools.Purpose statementThe use of this descriptive qualitative survey is to derive some apprehension from instructors about their perceptual experiences and patterns environing strong-arming behaviours in category. This is based on the fact that teachers thought this whole issue in a different position.This search survey is aimed at look intoing the grade and extent of job behaviour in schools nationally. The survey will imply all the signifiers of force in the school whether high-level or low-level. Problem behaviours which are regarded to be utmost or high-ranking include onslaught and even killings.This are normally given all the attending in most schools at the disbursal of the low-level signifiers of force ( Crick & A Casar, 2009 ) . Some signifiers of job behaviours are non viewed as being exterme, and are because overlooked. One such signifier of force is strong-arming and is truly widespread ( Whitted & A Dupper, 2010 ) . The environment and general temper of the school is ever affected by strong-arming patterns. The aftereffects of strong-arming are furthest much alarming and it s a high clip the job is work out one time and for all.The other intent of this descriptive qualitative research survey is to look into the sort of attempts which are underway in schools to foretell job behaviour. callable to the inauspicious effects of the latter in schools, a batch is being done to make away with it. The instructors are the admit leaders in this attempt nevertheless, trade for effectual anti-bullying plans must be the affair of the entire school community ( Nansel et al, 2009 ) . One of them is integrating strong-arming bar plans in the course of study. This aid in early instructions against job behaviours in the pupils. It besides creates sensory faculty amongst the school com munity and will travel a long manner in forestalling any farther behavioural jobs in future. Policies to cover with intimidation jobs are besides established. This has to affect all the members of the school community for effectual execution and fond regard to these policies. The caputs of the schools are besides at the head in the kerb of these behavioural jobs. There bases are to be steadfast and should direct strong messages which prohibit these signifiers of force since they passing and negatively hold both physical, societal, and psychological impacts.The concluding intent of this descriptive research survey is to look into how good the attempts to forestall job behaviour are being implemented. Some of the policies are implemented, but non in full, a thing which hinders the full actualization of the chief aim. The school squad answerable for inadvertence of the school s blustering(a) bar plan provides developing for all staff members on this issue and any other behavioural jobs and this commission trade with execution of all the set up policies ( Nansel et al, 2009 ) .This survey is to travel into the deepnesss of measuring and analyzing the coefficient of correlation between strong-arming and engagement in physical instruction categories, a thing which is to answer the procedure of battling job behaviours in schools and their associated effects.